UV & Impact Protection

UIP (UV & Impact Protection), formerly known as MP80 UIP, is a versatile protective and decorative coating for interior and exterior concrete or metal surfaces. UIP provides excellent protection against UV rays, abrasion, impact forces, and hot tires. Its chemical-resistant finish ensures exceptional color and gloss retention.

Description

UIP, formerly known as MP80, is a versatile polyaspartic coating for protection and decoration purposes of interior or exterior concrete, or metal surfaces. UIP provides excellent protection against UV rays, impact forces, hot tire roll-up, and a wide range of chemicals. Its chemical-resistant finish ensures exceptional color and gloss retention over time. 

UIP acts as an external protective layer in Maxon's Solution Packs for corrosion/erosion neutralization, defending against a broad variety of physical impact forces and chemical spillage.

UIP is often used as a finish coat to provide an abrasion-resistant and chemical-resistant finish with outstanding color and gloss retention. UIP is ideal for a variety of high traffic commercial or residential flooring surfaces, and concrete countertops. Its durability makes it a perfect fit for road markings and traffic signage.

Typical Usage

UIP is perfect for a range of high-traffic commercial or residential flooring surfaces, including concrete countertops. Whether prioritizing durability in a commercial setting or maintaining aesthetics at home, UIP is the preferred product. It can also serve as a finish coat over various coatings, delivering abrasion and chemical resistance along with exceptional color and gloss retention.

Features and Benefits

Protection and durability

  • High resistance to abrasion and impact forces

  • Hot tire pick-up resistance

  • UV-resistant; provides fine optical clarity when used as a clear sealer/finish

  • Slip reduction - requires adding micro agents for grip improvement

Eco-Friendly

  • Green product, extremely low VOC

  • Meets FDA/CFSAN, U.S. Food Code

  • USDA accepted

Technical Features

  • Self priming with excellent bonding strength

  • Temperature range post-curing -370C to 1300C (110F to 2660F)

  • Random heat tolerance up to 1500C (3000F)

  • Cures at low-temperatures (-300F/-340C); longer curing time required in low temp

  • Typical re-coat time - 1 hour

  • Drying time:  walk-on time - from 1 to 2 hours, Complete drying time - 1 to 3 hours 

  • Excellent stain resistance

  • Low solvent odor

Physical Properties

Type of material:
Aliphatic Polyaspartic
Volume of solids:
80%
Estimated coverage:
1280 theoretical SqFt per Gallon @ 1MIL DFT
Recom. film thickness:
3 to 8 Mils per coat
Shelf Life:
12 months unopened, stored at 40oF - 200oF (5oC - 93oC) in covered area
Pot Life:
25 to 30 minutes
Dry Time:
1 to 3 hours
Flash Point:
39oF
Color and gloss:
Med-high gloss or matte, Finishes pigmented - factory or custom
Mixing Ratio:
1.0 Part A; 1.0 Part B
Thinner/clean up solvent:
Use XYLOL or MEK. Do not use alcohols
Recoat Min-Max window:
Min 1 hour - Max 48 hours
Method of application:
Spray or industrial-grade roller

Refer to our Material Safety Data Sheet (MSDS) regarding regulatory compliance, safety, hazards, spill procedures and disposal of this product.

While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you conduct tests to determine the suitability of Maxon Technologies, Inc. products for your particular purpose prior to use. 

NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.