eXtreme Impact Protection
XIP (eXtreme Impact Protection), formerly known as H2Poxy-B, is a 100% solids, hydrophobic, epoxy-based product. It exhibits exceptionally high resistance to hammering, hot tires, torque forces, and chemical spills. It is well suited for application on green concrete, cured concrete, and even wet metal, all while maintaining full protection effectiveness.
Description
XIP is a 100% solids, hydrophobic, epoxy-based product that features extreme adhesion and durability. XIP retains zero water when left submerged in salt water. XIP will not react to mist, humidity, rain, or water spills, even while in an uncured state. XIP may even be applied to green concrete, cured concrete, and even wet metal while still retaining full effectiveness.
NOTE: XIP is not a structural or restorative product and should only be used on substrates that are structurally sound.
Basic Usage
XIP is a 100% solids product making it ideal for a variety of applications where moisture is a concern. After curing it is extremely strong and resistant to a wide range of forces - hammering, abrasion, hot-tires, and resilient to many industrial chemicals.
Adhesion strength is excellent, with averages of 800 PSI/5.51 MPa on non-profiled metal. Under a 1,000 cycle taber abrasion test,samples coated with XIP lost only 0.3-0.5 mg of mass. XIP is also effective as a floor coating and suitable for marine to heavy industry applications.
Benefits
Extremely hydrophobic, can be applied in extremely wet conditions and even below the waterline
100% solids product
GREEN product, containing absolutely ZERO VOCs, and 25% of its ingredients include renewable plant-based source
Solvent free, low-to-no odor and easy to clean post-curing
Extremely cost-effective
High resistance to hammering, abrasion, freeze/thaw cycles, and thermal shock
Properties
XIP Base
| Property | Value | Method |
| Epoxide Equivalent Weight (g/eq) | 182 - 192 | ASTM D1652 |
| Epoxide Percentage (%) | 22.4 - 23.6 | ASTM D1652 |
| Epoxide Group Content (mmol/kg) | 5200 - 5500 | ASTM D1652 |
| Color (P_Atinum Cobalt) | 75 Max | ASTM D1209 |
| Viscosity @ 25℃ (mPa’s) | 11000 - 14000 | ASTM D445 |
| Hydrolyzable Chloride Content (ppm) | 500 Max | ASTM D1726 |
| Water Content (ppm) | 700 Max | ASTM E203 |
| Density @ 25℃ (g/m) | 1.16 | ASTM D4052 |
| Shelf Life (months) | 24 |
XIP Activator
| Property | Value | Method |
| Viscosity @ 25℃ (cPs) | 700 - 1200 | ASTM D2196 |
| Amine Value (mg KOH/g) | 270 - 310 | ASTM D2074 |
| Volatile Loss (% weight) | <3 | ASTM D98 - 2369 |
| Oretical Active Hydrogen Equivalent (AHEW)* | 133 | Calculated |
| Density @ 25℃ (kg/L) | 0.99 | ASTM D1475 |
| Density @ 25℃ (lbs/gal) | 8.26 | ASTM D1475 |
| Flash Point | 101℃ / 214℉ | ASTM D93 |
| Recommend use level (phr. EEW190) | 70 | |
| Shelf Life (months) | 24 |
Refer to our Material Safety Data Sheet (MSDS) regarding regulatory compliance, safety, hazards, spill procedures and disposal of this product.
While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you conduct tests to determine the suitability of Maxon Technologies, Inc. products for your particular purpose prior to use.
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE.